Skip to main content

One post tagged with "IPv6"

All about IPv6

View All Tags

Personal ASN and IPv6 Journey

· 13 min read
Adekabang
Tukang Ngoprek

Last Update: 25 March 2024

Part 1: ASN Application & Preparation

ASN Application via Lagrange

⛔ Disclaimer: Tidak ada sponsor dari Lagrange cuman discount

Lagrange Website

Lagrange Banner

Pendaftaran ASN melalui Lagrange per tanggal 25 Maret 2024 ada discount 40% off dari £25 ke £15.

  1. Untuk memulai aplikasi ASN, bisa langsung “Try now” dan lakukan Register akun Lagrange.

  2. Langsung aja “Create an ASN” di page LIR Services - Lagrange

    Lagrange LIR Service

  3. Ikutin proses purchasingnya.

  4. Setelah itu akan ada Applicationnya, pilih guided, nanti akan diarahkan untuk proses pembuatan akun dan pembuatan object di RIPE. kalau bingung apa yang di isi bisa juga mengacu ke video dibawah:

    1. Video pembuatan object di RIPE : Rifqi Arief in IPv6 Indonesia Telegram Group

    2. Pastikan utk mencatat beberapa informasi dibawah saat pembuatan:

      1. RIPE ADMIN-C: [Singkatan_Nama][Identifier]-RIPE (generate dari RIPE)
      2. RIPE MNT (mnt-by): bebas tapi unique
      3. Address: alamat personal
      4. abuse-c: ACR[Identifier]-RIPE(generate saat mengisi abuse-c melalui logo lonceng)
      5. mnt-ref: INFERNO-MNT (dari Lagrange) dan mnt-by (punya sendiri)
      6. Organisation: ORG-[Singkatan_Nama][IdentifierOrg]-RIPE (generate dari RIPE)
  5. Di proses ini akan ada beberapa submission di portal Lagrange yang membutuhkan informasi diatas

VPS support BGP Session

Lagrange ASN Form

Jika sudah sampai page ini, proses selanjutnya adalah pembelian VPS yang support BGP session.

⛔ Pastikan VPS yang disewa berada pada region EU, seperti Amsterdam, Frankfurt, UK

⛔ Disclaimer: Tidak ada sponsor dari iFog (cuman harga cukup terjangkau)

  1. Pilih VPS pada region EU (kasus saya pilih di Amsterdam 1) iFog Website

    iFog VPS Pricelist

  2. Ikutin proses purchasingnya (payment via CC atau Paypal)

  3. Beberapa catatan saat konfigurasi VPS:

    1. Hostname: FQDN [hostname].[domain].[tld]
    2. Password: optional
    3. BGP Session: ✅
    4. FogIXP Peering port: ✅
    5. Additional v6 BGP Transit via ASxxxx: optional
  4. Simpan Invoice untuk nanti di upload ke ticket Lagrange

  5. untuk pengisian Lagrange bisa menggunakan panduan berikut:

    1. Partner 1 ASN: ASN punya iFog atau VPS provider lainnya. iFog AMS VPS

      iFOg BGP Details

    2. Partner 1 NOC: email dari iFog atau VPS provider lainnya. iFog NOC Contact

      iFog Contact

    3. Partner 2 ASN dan Partner 2 NOC: bisa request sponsor ke grup telegram https://t.me/IPv6_Indonesia. Saya request sponsor ke om @malhuda (Thanks om bantuannya)

    4. Setelah submit, upload invoice dari iFog atau VPS provider lainnya di halaman ticket

    5. Jika terima email seperti ini dari VPS provider bisa balas “My ASN is still in the process of application, I will contact you after it finished.”

      iFog Email

    6. Tunggu deh sampe di ASN diterbitkan.

Issuing Process

Lagrange Process

Setelah ini akan ada beberapa proses approval yang dibutuhkan dari Lagrange:

  1. Document Agreement: Tanda tangan menggunakan DocuSign. Pastikan masukkan kode akses yang sesuai, ada pada tiket. Position pada kolom tanda tangan bisa di isi Individual.
  2. Upload ID: KTP/SIM/Paspor

👨‍🦳 Catatan Pendahulu

  • Tapi kalau mau lepas VPS EU, wajib cari upstream ke EU, Ke netassist atau udn aja atau bgptunnel
  • my.bgptunnel.com pake ini om buat presence di EU kalo nanti lepas VPS EU

Peering Application

Setelah ASN terbit, akan ada permintaan utk pengisian Application From dari FogIXP (jika VPS di iFog):

FogIXP Application Form:

  • Company/Organization: Full Name
  • Main person of contact (first+surname): Full Name
  • Personal email address of contact: Email sendiri
  • ASN: ASxxxxxx
  • AS-SET: ASxxxxxx:AS-SET (buat object baru di RIPE-DB dan add ASN milik sendiri sebagai member, + button)
  • IPv4 Max-Prefix Limit: 0 atau sesuai yg ingin di announce
  • IPv6 Max-Prefix Limit: 2 atau sesuai yg ingin di announce
  • Email Peering contact: Email sendiri
  • Email NOC contact: Email sendiri
  • 24/7 NOC phone: No Telp Sendiri
  • A list of prefixes you plan to announce: Prefix yang didapat dari Lagrange atau sponsor

👨‍🦳 Catatan Pendahulu

  • AS-SET full itu ada ASNnya didepan
    • Sudah gak bisa pakai AS-SET pendek
    • Karena yah ada drama sblmnya hahhaa
    • Tapi kalo penasaran, coba aja
  • AS-UPSTREAMS itu untuk upstream ya
    • JANGAN DIMASUKKAN KE AS-SET UTAMA
    • Pisah ya om
  • AS-SET khusus ASN sendiri dan downstream dan AS-SET khusus upstream
  • ...Untuk ASXXXXXX:AS-UPSTREAMS itu ditaruh di whois ASN aja, buat import export....
    • Jangan dimasukkan / dikirimkan ke peeringdb maupun upstream, langsung digaplok, 100%
    • Yang dikirim ke peeringdb maupun upstream, yang ASXXXXXX:AS-SET
    • Nah, pengisiannya juga membernya hanya ASN itu, dan downstream
    • Selain itu jangan coba coba masukkin, nnti bisa bisa ditabok lagi

PeeringDB

  1. Lakukan registrasi di PeeringDB.
  2. Masukkan email yang terdaftar di RIPE.
  3. Masukkan ASN dan Organization (Nama Lengkap) pada bagian Affiliate with Organization.

Setelah Affiliate sudah di approve, dapat melengkapi informasi di organization (full name, di menu dekat profile ) dan networks (ASN, ada di dalam organization)

Configure route6 in RIPE DB

Setelah mendapatkan alokasi IP, buat object baru di RIPE DB dengan type route6

mnt-by: mnt_sendiri dan yang memberi alokasi

route6: prefix IPv6 (xxxx:xxx::/48)

origin: AS_number

Jika saat membuat route6 gagal (kasus saya alokasi dari Lagrange dengan mnt INFERNO-MNT), dapat membuat tiket di portal Lagrange dengan menyertakan prefix dan mnt_sendiri.

Request RPKI pada block IP

Setelah mendapatkan block IP bisa request ke penyedia prefix untuk setup RPKI melalui open ticket.

Install VPS

Jika berlangganan di iFog, dapat melakukan instalasi VM secara manual setelah mendapatkan akses. rekomendasi OS adalah debian 12 dan disetup secara minimal (tanpa gui).

Untuk mempermudah dapat menambahkan konfigurasi dibawah pada file ~/.ssh/config.

Host bgp-server
HostName external_ip
User username
IdentityFile /path/to/private/key

dan dapat melakukan ssh dengan command dibawah:

ssh bgp-server

Part 2: Config BGP

Preparation

  1. Edit network interfaces & sesuaikan masing masing parameter < > (nama interface mungkin berbeda)

    vim /etc/network/interfaces
    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).

    source /etc/network/interfaces.d/*

    # The loopback network interface
    auto lo
    iface lo inet loopback

    # The primary network interface
    allow-hotplug ens18
    iface ens18 inet static
    address <IPv4_Public>/<Subnet_mask>
    gateway <IPv4_Gateway>
    # dns-* options are implemented by the resolvconf package, if installed
    dns-nameservers 9.9.9.9
    dns-search <domain>
    # disable multicast
    up ip link set dev $IFACE mtu 1500
    up ip link set multicast off dev $IFACE

    iface ens18 inet6 static
    address <IPv6 Public>
    netmask <Subnet_mask>
    gateway <IPv6_Gateway>
    # dns-* options are implemented by the resolvconf package, if installed
    dns-nameservers 2620:fe::fe
    dns-search <domain>
    # disable multicast
    up ip link set dev $IFACE mtu 1500
    up ip link set multicast off dev $IFACE

    # The secondary network interface to FogIXP
    iface ens19 inet6 static
    address <IPv6 Public>
    netmask <Subnet_mask>
    gateway <IPv6_Gateway>
    # dns-* options are implemented by the resolvconf package, if installed
    dns-nameservers 2620:fe::fe
    dns-search <domain>
    # disable multicast
    up ip link set dev $IFACE mtu 1500
    up ip link set multicast off dev $IFACE
    systemctl restart networking
  2. Edit sysctl.conf (backup default jika diperlukan)

    # cp /etc/sysctl.conf{,.default} 
    vim /etc/sysctl.conf
    fs.file-max = 16777216
    fs.nr_open = 1073741824
    kernel.hung_task_timeout_secs = 0
    kernel.msgmax = 65536
    kernel.msgmnb = 65536
    net.core.default_qdisc = cake
    net.core.netdev_max_backlog = 30000
    net.core.rmem_default = 67108864
    net.core.rmem_max = 67108864
    net.core.somaxconn = 65536
    net.core.wmem_max = 67108864
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.all.arp_announce = 1
    net.ipv4.conf.all.arp_filter = 1
    net.ipv4.conf.all.arp_ignore = 2
    net.ipv4.conf.all.forwarding = 1
    net.ipv4.conf.all.ignore_routes_with_linkdown = 1
    net.ipv4.conf.all.rp_filter = 0
    net.ipv4.conf.all.secure_redirects = 0
    net.ipv4.conf.all.send_redirects = 0
    net.ipv4.fib_multipath_use_neigh = 1
    net.ipv4.icmp_echo_ignore_broadcasts = 1
    net.ipv4.icmp_errors_use_inbound_ifaddr = 1
    net.ipv4.icmp_ignore_bogus_error_responses = 1
    net.ipv4.icmp_msgs_per_sec = 2500
    net.ipv4.icmp_ratelimit = 0
    net.ipv4.igmp_max_memberships = 100
    net.ipv4.ip_forward = 1
    net.ipv4.ip_local_port_range = 1024 65535
    net.ipv4.neigh.default.base_reachable_time_ms = 14400000
    net.ipv4.neigh.default.gc_thresh1 = 1024
    net.ipv4.neigh.default.gc_thresh2 = 2048
    net.ipv4.neigh.default.gc_thresh2 = 8192
    net.ipv4.neigh.default.gc_thresh3 = 4096
    net.ipv4.neigh.default.gc_thresh3 = 16384
    net.ipv4.route.max_size = 1073741824
    net.ipv4.tcp_congestion_control = bbr
    net.ipv4.tcp_dsack = 1
    net.ipv4.tcp_fin_timeout = 30
    net.ipv4.tcp_keepalive_time = 120
    net.ipv4.tcp_l3mdev_accept = 1
    net.ipv4.tcp_max_syn_backlog = 8192
    net.ipv4.tcp_mem = 4194304 16777216 67108864
    net.ipv4.tcp_no_metrics_save = 1
    net.ipv4.tcp_rmem = 4194304 16777216 67108864
    net.ipv4.tcp_sack = 1
    net.ipv4.tcp_syn_retries = 3
    net.ipv4.tcp_synack_retries = 3
    net.ipv4.tcp_syncookies = 1
    net.ipv4.tcp_timestamps = 1
    net.ipv4.tcp_window_scaling = 1
    net.ipv4.tcp_wmem = 4194304 16777216 67108864
    net.ipv6.conf.all.accept_ra_defrtr = 0
    net.ipv6.conf.all.accept_ra_pinfo = 0
    net.ipv6.conf.all.accept_ra_rtr_pref = 0
    net.ipv6.conf.all.accept_redirects = 0
    net.ipv6.conf.all.accept_source_route = 0
    net.ipv6.conf.all.autoconf = 0
    net.ipv6.conf.all.dad_transmits = 0
    net.ipv6.conf.all.forwarding = 1
    net.ipv6.conf.all.ignore_routes_with_linkdown = 1
    net.ipv6.conf.all.router_solicitations = -1
    net.ipv6.icmp.ratelimit = 0
    #net.ipv6.conf.all.send_redirects = 0
    net.ipv6.neigh.default.base_reachable_time_ms = 14400000
    net.ipv6.neigh.default.gc_thresh1 = 1024
    net.ipv6.neigh.default.gc_thresh2 = 2048
    net.ipv6.neigh.default.gc_thresh2 = 8192
    net.ipv6.neigh.default.gc_thresh3 = 4096
    net.ipv6.neigh.default.gc_thresh3 = 16384
    net.ipv6.route.max_size = 32768000
    vm.max_map_count = 1048575
    vm.swappiness = 100

    net.ipv6.conf.all.accept_ra = 0
    #net.ipv6.conf.all.proxy_ndp = 1

    #net.netfilter.nf_conntrack_acct = 1
    #net.netfilter.nf_conntrack_checksum = 0
    #net.netfilter.nf_conntrack_max = 65535
    #net.netfilter.nf_conntrack_tcp_timeout_established = 7440
    #net.netfilter.nf_conntrack_udp_timeout = 60
    #net.netfilter.nf_conntrack_udp_timeout_stream = 180
    #net.netfilter.nf_conntrack_helper = 1

    # net.ipv6.conf.all.disable_ipv6 = 1

    Config sesuai interface IXP yang dimiliki

    ### Disable multicast FogIXP Interface ###
    net.ipv4.conf.<interface_name>.arp_announce = 1
    net.ipv4.conf.<interface_name>.arp_filter = 1
    net.ipv4.conf.<interface_name>.arp_ignore=2
    net.ipv4.conf.<interface_name>.arp_notify=1
    net.ipv4.conf.<interface_name>.proxy_arp = 0
    net.ipv4.conf.<interface_name>.rp_filter=0
    net.ipv4.neigh.default.gc_interval = 30
    net.ipv4.neigh.<interface_name>.base_reachable_time_ms = 14400000
    net.ipv4.neigh.<interface_name>.gc_stale_time = 60
    net.ipv6.conf.<interface_name>.accept_ra = 0
    net.ipv6.conf.<interface_name>.autoconf = 0
    net.ipv6.conf.<interface_name>.router_solicitations = -1
    net.ipv6.neigh.default.gc_interval = 30
    net.ipv6.neigh.<interface_name>.base_reachable_time_ms = 14400000
    net.ipv6.neigh.<interface_name>.gc_stale_time = 60
    sysctl -p
    # or
    reboot
  3. Pre Setup (optional)

    Github: Xeoncross/lowendscript, scope:

    • update_timezone
    • remove_unneeded
    • update_upgrade
    • install_dash
    • install_vim
    • install_nano
    • install_htop
    • install_mc
    • install_iotop
    • install_iftop
    • install_syslogd
    • install_curl
    • apt_clean
    wget --no-check-certificate https://raw.github.com/Xeoncross/lowendscript/master/setup-debian.sh
    chmod a+rx setup-debian.sh
    ./setup-debian.sh system
  4. Timezone and NTP

    apt install ntp -y

    Edit NTP configuration

    vim /etc/ntp.conf
    server 0.debian.pool.ntp.org iburst
    server 1.debian.pool.ntp.org iburst
    server 2.debian.pool.ntp.org iburst
    server 3.debian.pool.ntp.org iburst
    sudo systemctl restart ntp

    Set Timezone and see status

    timedatectl set-timezone Asia/Jakarta
    timedatectl

    timedatectl status

Konfigurasi Pathvector

  1. Install Pathvector dan Bird2

    curl https://repo.pathvector.io/pgp.asc > /usr/share/keyrings/pathvector.asc
    echo "deb [signed-by=/usr/share/keyrings/pathvector.asc] https://repo.pathvector.io/apt/ stable main" > /etc/apt/sources.list.d/pathvector.list
    apt update && apt install -y pathvector bird2
  2. Konfigurasi /etc/pathvector.yml

    vim /etc/pathvector.yml

    first block

    asn: <your_asn>
    bgpq-args: "-S AFRINIC,APNIC,ARIN,LACNIC,RIPE"
    default-route: false
    irr-query-timeout: 30
    irr-server: "rr.ntt.net"
    merge-paths: true
    peeringdb-api-key: "<peeringdb_api_key>"
    peeringdb-query-timeout: 30
    prefixes:
    - "<prefix_plan_to_be_announce>"
    - "<prefix_plan_to_be_announce>"
    router-id: "<an_ipv4_address>"
    rtr-server: "172.65.0.2:8282"

    Catatan

    • Ubahlah your_asn menjadi ASN anda.
    • Lalu, IRR hanya valid untuk AFRINIC, APNIC, ARIN, LACNIC, RIPE
    • Tidak menerima rute default
    • IRR server menggunakan NTT
    • Ubah peeringdb_api_key dengan kunci milik anda sendiri. Hak akses pada PeeringDB gunakan hanya baca
    • Ubahlah prefix_plan_to_be_announce dengan prefix yang akan di gunakan.
    • Ubahlah router-id dengan IPv4 VPS anda (atau gunakan IP lokal jika memang tidak ada IP publiknya (karena hanya sebagai pengenal saja)).
    • rtr-server menggunakan Cloudflare

    Aktivasi kernel karena akan menggunakan full table

    kernel:
    learn: true

    # BGP Large Communities
    # <your_asn>:1:1 - Learned from upstream
    # <your_asn>:1:2 - Learned from route server
    # <your_asn>:1:3 - Learned from peer
    # <your_asn>:1:4 - Learned from downstream
    # <your_asn>:1:5 - Learned from iBGP

    Template (ganti your_asn dengan ASN yang dimiliki gunakan sesuai kebutuhan)

    templates:
    upstream:
    add-on-import:
    - <your_asn>:1:1
    allow-local-as: true
    announce:
    - <your_asn>:1:4
    local-pref: 100
    remove-all-communities: <your_asn>

    routeserver:
    add-on-import:
    - <your_asn>:1:2
    announce:
    - <your_asn>:1:4
    auto-import-limits: true
    enforce-first-as: false
    enforce-peer-nexthop: false
    filter-transit-asns: true
    local-pref: 200
    remove-all-communities: <your_asn>

    peer:
    add-on-import:
    - <your_asn>:1:3
    announce:
    - <your_asn>:1:4
    auto-as-set: true
    auto-import-limits: true
    filter-irr: true
    filter-transit-asns: true
    irr-accept-child-prefixes: true
    local-pref: 300
    remove-all-communities: <your_asn>

    downstream:
    add-on-import:
    - <your_asn>:1:4
    allow-blackhole-community: true
    announce:
    - <your_asn>:1:1
    - <your_asn>:1:2
    - <your_asn>:1:3
    auto-as-set: true
    auto-import-limits: true
    filter-irr: true
    filter-transit-asns: true
    irr-accept-child-prefixes: true
    local-pref: 400
    remove-all-communities: <your_asn>

    ibgp:
    allow-local-as: true
    asn: <your_asn>
    direct: true
    enforce-first-as: false
    enforce-peer-nexthop: false
    filter-irr: false
    filter-rpki: false
    next-hop-self: true
    remove-all-communities: <your_asn>

    Catatan:

    • Template upstream hanya digunakan untuk transit AS
    • Template routeserver hanya digunakan untuk peering ke routeserver
    • Template peer hanya digunakan untuk melakukan bilateral peering
    • Template downstream hanya boleh dipakai untuk melakukan downstream AS pihak lain
    • Template ibgp hanya digunakan untuk AS yang sama

    Template peers (gunakan sesuai kebutuhan)

    peers:
    ############
    # UPSTREAM #
    ############
    upstream_name:
    asn: neigh_asn
    disabled: false
    listen6: "<local_address>"
    local-pref: 100
    neighbors:
    - "<neigh_address>"
    template: upstream

    ###############
    # ROUTESERVER #
    ###############
    routeserver_name:
    asn: neigh_asn
    disabled: false
    listen4: "<local_address>"
    listen6: "<local_address>"
    local-pref: 200
    neighbors:
    - "<neigh_address>"
    - "<neigh_address>"
    template: routeserver

    ###########
    # PEERING #
    ###########
    peering_name:
    asn: neigh_asn
    disabled: false
    listen6: "<local_address>"
    local-pref: 300
    neighbors:
    - "<neigh_address>"
    template: peer

    ############
    # INTERNAL #
    ############
    ibgp_name:
    add-on-import:
    - <your_asn>:1:1
    announce:
    - <your_asn>:1:1
    disabled: false
    listen6: "<local_address>"
    local-port: 179
    local-pref: 150
    neighbor-port: 179
    neighbors:
    - "<neigh_address>"
    template: ibgp

    Generate bird config:

    pathvector generate

    Cek Routing sudah masuk atau blm

    ip -6 route

    Cek status BGP

    birdc show protocol
  3. Set cron untuk update IRR prefix lists dan PeeringDB prefix limits setiap 12 jam.

    #crontab -e
    0 */12 * * * pathvector generate

Reference

Part 3: Set Up Interface

  1. Buat dummy interface script

    vim /usr/local/bin/setup-dummy-interface.sh
    #!/bin/bash
    ip link add dummy0 type dummy
    ip addr add <YOUR_IPV4_INTERFACE_IP>/24 dev dummy0
    ip addr add <YOUR_IPV6_INTERFACE_IP>/64 dev dummy0
    ip link set dummy0 up
    chmod +x /usr/local/bin/setup-dummy-interface.sh
  2. Buat Systemd Service 

    vim /etc/systemd/system/dummy-interface.service
    [Unit]
    Description=Setup Dummy Interface
    After=network.target

    [Service]
    ExecStart=/usr/local/bin/setup-dummy-interface.sh
    RemainAfterExit=yes

    [Install]
    WantedBy=multi-user.target
    systemctl enable dummy-interface.service
    systemctl start dummy-interface.service
  3. Test Koneksi

    1. Ping

      ping -I <YOUR_IPV4_INTERFACE_IP> 8.8.8.8
      ping6 -I <YOUR_IPV6_INTERFACE_IP> 2001:4860:4860::8888
    2. Curl

      curl --interface <YOUR_IPV4_INTERFACE_IP> -4 ifconfig.me
      curl --interface <YOUR_IPV6_INTERFACE_IP> -6 ifconfig.me
    3. mtr

      mtr -I dummy0 google.com

Part 4: Tunnel ke Rumah atau DC

Main Server (BGP Router)

  1. Install wireguard

    apt update
    apt install wireguard
  2. Generate Wireguard Private dan Public key

    wg genkey | tee /etc/wireguard/private.key
    chmod 600 /etc/wireguard/private.key
    cat /etc/wireguard/private.key | wg pubkey | tee /etc/wireguard/public.key

    # Baris Pertama Private Key
    # Baris Kedua Public Key -> simpan untuk konfigurasi client server
  3. Buat Konfigurasi Wireguard di /etc/wireguard/wg0.conf

    [Interface]
    PrivateKey = <Your-Main-Server-Private-Key>
    Address = <Your-Main-Server-IPv6-Allocation>/64
    ListenPort = 51820
    Table = off

    [Peer]
    PublicKey = <Your-Client-Public-Key> #setelah digenerate
    AllowedIPs = <Your-Client-IPv6-Allocation>/128
  4. Enable dan Start Wireguard Setelah Public Key Client di generate

    systemctl enable wg-quick@wg0
    systemctl start wg-quick@wg0
  5. Konfigurasi forwarding

    # Port Forwarding for IPv4 - opsional jika announce IPv4
    net.ipv4.ip_forward=1

    # Port forwarding for IPv6
    net.ipv6.conf.all.forwarding=1
  6. Apply konfigurasi forwarding

    sudo sysctl -p

Client Server (Home Server) - Debian/Ubuntu

  1. Install wireguard

    apt update
    apt install wireguard
  2. Generate Wireguard Private dan Public key

    wg genkey | tee /etc/wireguard/private.key
    chmod 600 /etc/wireguard/private.key
    cat /etc/wireguard/private.key | wg pubkey | tee /etc/wireguard/public.key

    # Baris Pertama Private Key
    # Baris Kedua Public Key -> Masukkan ke konfigurasi main server
  3. Buat Konfigurasi Wireguard di /etc/wireguard/wg0.conf

    [Interface]
    PrivateKey = <Your-Client-Private-Key>
    Address = <Your-Client-IPv6-Allocation>/64
    DNS = 2606:4700:4700::1111
    DNS = 2606:4700:4700::1001

    [Peer]
    PublicKey = <Your-Main-Server-Public-Key>
    Endpoint = <Main-Server-Public-IPv6>:51820
    AllowedIPs = ::/0
    PersistentKeepalive = 25
  4. Enable dan Start Wireguard Setelah Public Key Client digenerate

    systemctl enable wg-quick@wg0
    systemctl start wg-quick@wg0

Uji Coba di Client Server

  1. Ping

    ping6 -I <YOUR_IPV6_INTERFACE_IP> 2001:4860:4860::8888
  2. Curl

    curl --interface <YOUR_IPV6_INTERFACE_IP> -6 ifconfig.me
  3. mtr

    mtr -I dummy0 google.com

Miscellaneous

Generate Wireguard QRCode

apt install qrencode
qrencode -t ansiutf8 < /etc/wireguard/wg-client.conf

https://www.cyberciti.biz/faq/how-to-generate-wireguard-qr-code-on-linux-for-mobile/

Reference